Gli amici di RC Mania ci segnalano la prima immagine del sistema di navigazione GU-INS (Inertial Navigation System). Il modulo è compatibile con i quadricotteri GAUI X330 e X500, è può essere utilizzato su droni di maggiori dimensioni e ottocotteri. Fra le funzioni del modulo troviamo il GPS, telemetria, stabilizzatore e navigazione di ritorno automatica. In basso i dati della cartella stampa pubblicata della GAUI.

Caratteristiche Gaui GU-INS (Inertial Navigation System)

• GAUI GU-INS supports X-type flying Quad-copter (GAUI 330X, 500X), it can be extended for use on Hexa-copter, Octo-copter etc…. (Please reference GAUI product version/optional purchase module).
• OSD (On-screen display, optional purchase module) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.
• Onboard USB interface connector for firmware update.
• Interface provided to connect with standard receiver and JR satellite receiver.

• Specifications:

1. 1. 1. Dimensions：Main controller: 53.5 x 38.5 x 12mm 
GPS antenna: 42 x 34 x 15mm
Weight：Main controller: 27g (w/o cables ), GPS antenna: 23g (with cable)
      2. Frequency: 300Hz output to ESC
      3. Operating temperature: -20~80°C
      4. Operating modes: Rate (manual) mode, Auto balance mode, GPS positioning mode.
      5. Rate (manual) mode: Max angular velocity: 300 degree/sec
      6. Auto balance mode: Max tilt angle: 60 degree.
      7. GPS positioning mode:
         
         1. Hovering accuracy: Horizontal: ±1m, Vertical: ±0.5m
         2. Max yaw angular velocity: 250 degree/sec
         3. Max tilt angle: 45 degree.
         4. Max horizontal speed: 10 m/s，36 km/hr
         5. Max vertical speed: 8 m/s (horizontal posture)
      8. GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
      9. Fail-safe functions: Automatic Go-Home, Signal lost Go-Home, Low voltage protection.
      10. Suitable wind condition: < 10 m/s

• Features:

1. 1. Easy to install and setup, no need of software on PC for adjustment.
   2. All functions can be setup & confirmed by LED lights indication.
   3. All in one design (combined inertial measurement unit and main controller) with simple cable wiring.